Featured products
Competitive price
- High strength alumina microcrystalline grinding... 2022/11/02
The main component of this product is Nano high purity alumina, which is produced through special technological metho...
- Microcrystalline calcined alumina powder 2022/11/01
Microcrystalline calcined alumina powder CAS No:1344-28-1 MF:Al2O3 Specification Item ZY-701 ZY-711 Test Method ...
- Alumina for lithium battery separator coating 2022/11/01
Alumina for lithium battery separator coating CAS No:1344-28-1 MF:Al2O3 Physical Characteristics: ITEM Unit ZYL-...
- Boehmite powder 2022/11/01
Boehmite powder for pole piece coating and copper clad laminate CAS No.: 1318-23-6 MF : ALOOH Physical Characteristi...
Accelerator TDEC-75 Masterbatch
Pubdate:2019/04/29 Predispersed rubber chemical Masterbatch views:310
Konson® Accelerator TDEC-75 Masterbatch
Product description
Composition 75 % tellurium diethyldithiocarbamate,
25% EPDM/EVA binder and dispersing agents
Appearance White or light-yellow granules
Density,20 oC Approx. ~ 1.23 g / cm3 (20oC)
Physiological properties : See safety data sheet (MSDS)
Raw material characteristics of TDEC:
Melting point ~ 108 oC Evaporation loss ≤ 0.5%
TDEC content ≥ 98% Sieve residue 63µm ≤ 0.5 %
Tellurium Content 16.5 – 19.0 % Ash content ≤ 0.3 %
Use Characteristics Super accelerator Konson® TDEC-75 for NR and synthetic rubbers. It causes a high spped vulcanization of EPDM and IIR when used together with other accelerators of the thiazole, thiuram and dithiocarbamate class. Even used in small amounts of Konson® TDEC-70, it gives a shorter total curing time. The vulcanizates using Konson® TDEC-75 have high tensile strength, and good aging resistance. Additions of Konson® TDEC-75 are advantageous in soft compounds with a high oil content, since larger dosages of oil reduce the curing rate.
Processing Advantages The thermoplastic, excellent compatible EPDM/EVA binder which is combined with active dispersing promoters allows much more easily and quickly incorporation and excellent dispersion in the rubber mixing. In this way, optimal activity of the effective TDEC is assured.
Dosage levels Konson® TDEC-75 is used as an additional accelerator together with thiazole, thiuram and dithiocarbamate accelerators. For preventing blooming the dosage should not exceed 0.5 phr.
Applications It is broadly used in industrial goods, wires and cables, air bags tubes and rubberized clothes; and also used in automobile hoses, steam and acid resistant hoses, profiles.
Packing Net 25 kg cartons with plastic inner.
Storage stability In original closed containers under cool and dry conditions max. 1 years.
Handling Consult material safety data sheet (MSDS) for additional handling information.
Previous: Accelerator TMTD-75 Masterbatch