Featured products
Competitive price
- High strength alumina microcrystalline grinding... 2022/11/02
The main component of this product is Nano high purity alumina, which is produced through special technological metho...
- Microcrystalline calcined alumina powder 2022/11/01
Microcrystalline calcined alumina powder CAS No:1344-28-1 MF:Al2O3 Specification Item ZY-701 ZY-711 Test Method ...
- Alumina for lithium battery separator coating 2022/11/01
Alumina for lithium battery separator coating CAS No:1344-28-1 MF:Al2O3 Physical Characteristics: ITEM Unit ZYL-...
- Boehmite powder 2022/11/01
Boehmite powder for pole piece coating and copper clad laminate CAS No.: 1318-23-6 MF : ALOOH Physical Characteristi...
How to synthesize rubber accelerator TDEC ?
Pubdate:2018/09/12 NEWS views:1004
Rubber accelerator TDEC is a kind of super accelerator used to NR,NBR,SBR.EPDM. Commonly, using with some other kind of accelerators such as benzothiazole, sulfenamide. In IIR it results in extremely fast curing,Konson® TDEC is non-staining and non-discoloring. It can be used as a primary accelerator in some continuous cure applications.A fast velocity at vulcanizing temperature can be obtained, and intensile can be increased. Suitable for making inner tube of tires, soft tube, isolating layer of wire and cable, etc.It would result in increased tensile strength and modulus in sulfur vulcanization. Please be adivsed that in the application of Konson® TDEC N-nitrosodiethylamine can be formed by the reaction of diethylamine, a decomposition product, with nitrosating agents (nitrogen oxides) .Don’t use for manufacturing the products contacting with foods. Konson® TDEC is regulated for use in articles in contact with food as specified under BgVV XXI, Category 4.
Prdocution technology :
- Main equipment :
Enamel reactor
Metering pump
Fluid reservoir
Circulating water vacuum pump
Vacuum drying oven
Filtering tank
Sieving machine
Electrothermal melting point tester
- Main raw material
Diethylamine(DEA)
Sodium hydroxide(NAOH)
Carbon disulfide(CS2)
Sodium tellurite solution(Na2TeO3)
Hydrochloric acid solution
- Synthetic routes
Note :
The most important key is to control temperature in process of synthesis of DDTC . Also pay attention to the ventilation to avoid raw material volatilization . PH value is also very important .The TDEC quality would be best in PH 8.7-9.3 .